UNM India

• The locking pin on the side of the casing at the base of the handle allows this dual system to work in independent Fall Arrest & Winch modes.
• Can be easily mounted on the leg of KARAM Tripod PN800 using specialized brackets
• Minium Breaking Strength > 12kN
• Also available with SS Wire Rope instead of GI Wire Rope
• Conforms to EN 360:2002 & EN 1496:2006 Class B

Unique Features :

• The Dual mode- helps easily movement of user while working in confined spaces
• Retractable mode- enables easy mount of user in Confined Space. Also provides Fall Protection
• Winch mode- enables easy retrieval
• Comes with PN 162 Snap Hook with Impact Indicator

Harness designed to offer the perfect solution for safe working at height in potentially explosive atmosphere.

• Comes with two front attachment textile loops in addition to the Forged Aluminum Dorsal D-Ring for Fall Arrest.
• Stainless Steel Buckles for excellent Corrosion Protection.
• Adjustable Chest, Shoulder and Thigh Straps.
• Conforms to EN 361: 2002.
• ATex 94/9/CE, EN 13463-1:2009 and EN 13463-5:2003. Harness webbing also tested for surface resistance as per EN 1149-1: 2006 and EN 1149-5:2008.

• Attachment Elements – 2 Ideally Positioned Chest attachment textile loops and a Dorsal attachment D-Ring for Fall Arrest.
• Equipped with Light Weight Aluminum D-Rings.
• Adaptability – Fully adjustable shoulder, chest strap & thigh-straps.
• Convenience – Shoulder straps have combination buckles & thigh straps are provided with quick release buckles for easy adjustment. Lanyard Keepers on shoulder straps have been provided for easy placement of free lanyards.
• Ergonomics – Specially cushioned mesh net has been used for better shock absorption & comfort of the user.
• Conforms to EN 361:2002

To raise and lower the mass/load/material with ease. The device is also used for either raising or lowering the mass/load/
material to the ground or the next accessible level.

• It is a versatile system made up of Aluminium and Steel components, which are light in weight and highly corrosion resistant.
• The system is provided in a fully assembled factory fitted 3:1 or 5:1 hauling ratio.
• A single person can easily operate the device to raise or lower mass/load/material with considerable ease.
• Unidirectional movement of the Rope Retention Guide (Ref. PN 404) allows the rope to hold itself in place, hence preventing any reel-back and allowing effortless ascent and controlled descent.
• It comes with an ascend Rope Clamp along with a Cross Arm Strap and specially designed control device PN 410. This arrangement stops the descent in case it is accidentally released.
• The rope used is a KARAM Kernmantle rope of Diameter 10.5mm. This rope is tested for strength, is abrasion resistant, and comes fitted in the system in lengths as per requirement.
• Suitable for use for maximum personal load of 250 kgs.

• Casing made up of high impact strength Polymer, to prevent breakage and is nearly indestructible.
• Comes in 25mm Width Webbing.
• Has PN 162 Hook with Load Indicator at attachment end.
• Anchorage Eye with Swivel action. Prevents undue twist of rope while working or in the event of a fall.
• Minimum Breaking Strength is 15kN.
• Conforms to EN 360:2002.